April 10, 2021 @ 10 am
In this meeting we will be discussing the ASEA Organization and Events. You will receive an invite via your respective school’s email listing and you can use our LinkTree for the meeting information.
ASEA Webinar Series Part III
April 02 2021
Part III Series:
“Restoration Architecture: A Glimpse of Multifamily Residential Restoration” – Stephanie Toro
Stephanie Toro is a Fullerton College Alumni. She is from Fullerton, Stephanie transferred into Cal Poly Pomona and has a wide rage of architectural experience since! The pictures above are just some of her works! Below is some descriptions of the projects featured on this page!
Nadel Architecture + Planning
New Multi-Family Complex – Reno, Nevada
Design team member for schematic and design development phase of project. The new complex features two new four- story residential buildings with a five-level above grade parking structure and has a total of 307 units. The unit mix consist of studios, 1 bedrooms, 1 Bedroom deep units, and 2 Bedrooms. Assisted in the development of unit layouts and in the massing and façade design for the complex.
Apartment Complex Remodel in Hollywood, Ca
This 79-unit, 6-story complex will receive a new contemporary exterior finish with updated to communal spaces and exterior pool / lounge area. Primary responsibilities on this project was to develop a 3D – Rhino model to produce Lumion renders of possible exterior finishes and new potential finishes and layouts to common spaces.
Apartment Complex Remodel – Unit Infill Entitlement San Jose, Ca
Assisted with developing permit set for unit infill entitlement in a mix use development complex in downtown San Jose. Assisted in the design of unit layouts to convert 9,000 square feet of unused space into 14 units of leasable space. The site-specific units were created to maximize the allotted space, resulting in elongated micro-units that feature clear a clear story wall in bedrooms for light and ventilation.
Elementary School – Los Angeles, Ca
Construction Document Team member
Assisted modifying details, floor plans, sections, and 3D model in Revit for construction design documents. Coordinated architectural construction document set and consultant document set for DSA submittal with appropriate DSA PDF formatting of submission documents.
ASEA STUDENT PRESIDENTS + BOARD MEETING
You will receive an invite via your respective school’s email listing
SCI-Arc Admissions Transfer Portfolio Insight
This session is ideal for students looking to transfer to a B.Arch
program. The information sessions will cover, what makes a
portfolio standout, what should be included in a portfolio,
and how advanced placement is determined.
ASEA Webinar Series Part I
January 22 2021
Part I Series: Employability and Good Office Practices, Experiences by Joseph Bricio
Topics to include:
- Gaining and keeping employment.
- The importance of timing.
- Determining appropriate fees.
- Control of the volume of work.
- The Onus of Ownership and the Price of Participation.
ASEA Members can expect receiving a Zoom Meeting link with additional information on the morning of Friday January 22nd
Cal Poly ENV Virtual Open House
November 16-20 2020
The Cal Poly College of Environmental Design will be conducting a virtual open house! Register at https://env-virtual-open-houe-2020.eventbrite.com
Los Angeles Region Planning History Group Conference…………… Canceled
Saturday March 14th from 8:30am-1:30pm
Huntington Library and Gardens Rothenberg Hall
1151 Oxford Road San Marino, California
The seating capacity is 150, early registration is advisable
Here’s the link to the registration form (5 pages)
hours minutes seconds
Los Angeles Region Planning History Group Conference
Fourth Student Presidents / Officers / Advisors Meeting……………Canceled
Saturday April 4th 2020 at 10:00 AM.
Location: ELAC E7 – Technology Bldg. First Level – Room 119
hours minutes seconds
Fourth Student Presidents/Officers/Advisors Meeting
Water Heater Training……………Canceled
Saturday April 11th 10:00 AM to 2:00 PM
Location: ELAC– G7, Lecture Hall (LH-104)
hours minutes seconds
Water Heater Training
AIA Conference….. A’20!……………Canceled
You can serve for a minimum of 8 hours to receive 1 complimentary non-transferable 3-day conference registration with access to the Architecture Expo, Keynotes, and Education Sessions. Optional ticketed workshops, tours, and events are not included in this registration, but may be purchased separately. All details and registration is required at the following link –> A’20
Conference Schedule for the first day is in the following link A’20 Schedule
hours minutes seconds
Free Uponor Online Training, Register Today!
|Uponor North America to host five-part webinar series |
Uponor North America is proud to host a five-part webinar series to help you better understand integrated design based on human factors. Following the series, you will be able to explain why conservation of energy and efficiency should not be the prime focus but rather a product of achieving the desired indoor environment. This webinar series is hosted by Robert Bean, founder of Indoor Climate Consultants Inc.
WHAT: Five-part integrated design webinar series
Thursday, May 14, 10 a.m. PST;
Thursday, May 21, 10 am PST;
Thursday, May 28, 10 a.m. PST;
Thursday, June 4, 10 a.m. PST;
Thursday, June 11, 10 a.m. PST
All Engineers are invited to join a series of virtual discussions on integrated design, led by Robert Bean. This webinar series is PDH eligible; please make sure to fill out the survey following each webinar to receive your certificate..
The first webinar in the five-part series will cover an introduction to IEQ and the Built Environment. What every practitioner should know about the quality of indoor sound, thermal, air, light, odors, and vibration and its effect on productivity, learning and wellness?
The second webinar will discuss indoor air quality. The four key concerns in modern construction: moisture, radon, particulate and outgassing: prevention, correction, controlling and avoidance strategies.
The third webinar will focus on indoor thermal quality. The Fundamentals of Thermal Comfort: An Introduction to the Science.
The fourth webinar will focus on cover the fundamentals of thermal comfort. The Application of ASHRAE Standard 55 and Introduction to Online Compliance Tools.
The fifth webinar will discuss Architecture and Energy. The Role of Architecture, Enclosure and Interior Design for Enabling Low Exergy, HighPerformance HVAC Systems